n ne?? 206 ? ? ? ? # ? ? ? ? ? fhz connector 0.5mm pitch/connectors for fpc n ne?? emboss tape suitable for thin fpcs of 0.1mm, 0.12mm or 0.2mm thick. only 0.9mm height ?low-profile ?circuit pattern can be designed under the connector specifications ?current rating: 0.5a ac, dc ?voltage rating: 50v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/40m max. after environmental testing/20m max. (variation from initial value) ?insulation resistance: 800m min. ?withstanding voltage: 200v ac/minute ?applicable fpc: conductor pitch/0.5mm conductor width/0.35mm mating part thickness/0.10 0.01mm 0.120.03mm 0.200.03mm note : fpc to be actually used should be checked for applicability. * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. the dimensions above should serve as a guide line. contact jst for details. pc board layout (viewed from component side) and assembly layout
207 fhz connector n ne?? when the slider is closed ? " # $ bc q'ty / reel 7.0 11.5 12.5 14.0 11.5 1.5 7.0 8.5 14.0 16.0 1.5 8.5 9.5 10.5 11.6 16.1 17.1 18.6 16.1 6.1 11.6 13.1 18.6 20.6 6.1 13.1 14.1 15.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.12 0.12 0.2 0.2 0.2 0.2 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 applicable fpc thickness (mm) slider normal type dimensions (mm) circuits 15 24 26 29 24 4 15 18 29 33 4 18 20 22 a 8.05 12.55 13.55 15.05 12.55 2.55 8.05 9.55 15.05 17.05 2.55 9.55 10.55 11.55 model no. 15fhz-sm1-s-tb f 24fhz-sm1-s-tb f 26fhz-sm1-s-tb f 29fhz-sm1-s-tb f 24fhz-sm1-s-tb 04fhz-sm1-tb f 15fhz-sm1-tb f 18fhz-sm1-tb f 29fhz-sm1-t-g-tb f 33fhz-sm1-t-tb f 04fhz-sm1-tb 18fhz-sm1-tb 20fhz-sm1-tb 22fhz-sm1-tb material and finish contact: copper alloy, copper-undercoated, tin-plated (reflow treatment) 29fhz-sm1-t-g-tb (f) and 10fhz-rsm1-g-tb ... nickel-undercoated, gold-plated (flash) housing: lcp, ul94v-0, normal type...yellow reverse type...natural solder tab: copper alloy, copper-undercoated, tin-plated (reflow treatment) slider: pa 9t, ul94v-0, applicable fpc thickness 0.1 gray applicable fpc thickness 0.12 blue applicable fpc thickness 0.2 black slider arm: stainless bc q'ty / reel 2.5 3.5 4.5 8.5 9.5 10.5 7.1 8.1 9.1 13.1 14.1 15.1 4,000 4,000 4,000 4,000 4,000 4,000 applicable fpc thickness (mm) 0.2 0.2 0.2 0.2 0.2 0.2 closed slider reverse type dimensions (mm) circuits 6 8 10 18 20 22 a 3.55 4.55 5.55 9.55 10.55 11.55 model no. 06fhz-rsm1-tb 08fhz-rsm1-tb 10fhz-rsm1-g-tb 18fhz-rsm1-tb 20fhz-rsm1-tb 22fhz-rsm1-tb opened opened closed closed when the slider is closed ? " # $ rohs compliance this product displays (lf)(sn) on a label. n j o ? ? ? ? n n ? reinforcing layer base layer cover layer ? ? reinforcing layer base layer cover layer ? reinforcing layer base layer cover layer normal type reverse type connector lead section dimensions of fpc note: n --- number of circuits
|
